If you're looking to run a raft of monitors on your domU, and require fast 3D rendering and more, you're probably looking to run a proprietary driver. I have a HD 6970 which I'm using for passthrough, so the following discusses the AMD/ATI driver only.
First things first: follow my instructions for
installing the proprietary ATI driver.
When you try to start it, you'll more than likely find it fails with the following error.
# modprobe -v fglrx
insmod /lib/modules/3.2.13/kernel/drivers/acpi/button.ko
WARNING: Error inserting button (/lib/modules/3.2.13/kernel/drivers/acpi/button.ko): No such device
FATAL: Error inserting fglrx (/lib/modules/3.2.13/updates/dkms/fglrx.ko): No such device
Unfortunately, this isn't awfully easy to fix. You'll find the AMD fglrx module has a single dependency; the same module that gave the WARNING above:
# modinfo fglrx | grep depends
depends: button
Predictably, if you try loading this dependency, you get the same fatal error: "No such device".
# modprobe -v button
insmod /lib/modules/3.2.13/kernel/drivers/acpi/button.ko
FATAL: Error inserting button (/lib/modules/3.2.13/kernel/drivers/acpi/button.ko): No such device
Further investigation doesn't yield many results. There are no errors reported in dmesg. What can the problem be?
# modinfo button | grep description
description: ACPI Button Driver
# ls /proc/acpi
ls: cannot access /proc/acpi: No such file or directory
# dmesg | grep ACPI | head -n 1
[ 0.000000] ACPI in unprivileged domain disabled
It's an ACPI driver, but ACPI isn't loaded. So we found the problem. If we look in arch/x86/xen/setup.c we find what's responsible for disabling ACPI:
#ifdef CONFIG_ACPI
if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
disable_acpi();
}
#endif
In the domU we won't have ACPI, and we won't have /proc/acpi/*. Which means that modprobe button isn't ever going to work, and by extension nor is modprobe fglrx. So how can we install the proprietary ATI driver if we can't satisfy its dependency?
I'm sure brighter people than me have stumbled across this little irritation and figured out a sensible solution. After an hour or so I still didn't have any bright ideas, which left me with only one terrible option: make a stub ACPI Button driver. After all, I don't think I care whether the graphics driver knows when the metaphorical power button ("xen shutdown") is pressed.
All this really entails is stripping the ACPI includes and much of the code from drivers/acpi/button.c, and finally playing around to get the thing compiling. The resulting "stub" driver (based on
kernel 3.2.13) is here:
Instructions: First, look over the file above to check you're not downloading nefarious code. (Obviously it's clean, but it's important to get into that habit. Nobody else is looking over your shoulder checking these things for you). Second, take a backup of the original drivers/acpi/button.c file in your kernel source tree. Third, replace the original with this bastardised stub copy. Finally, recompile the kernel and copy the module over to domU. Or, in code:
$ cp drivers/acpi/button.c drivers/acpi/button.c.original
$ wget http://content.nixnotes.co.uk/xen/acpi/button.c -O drivers/acpi/button.c
$ make clean
$ make -j 10 modules
# xen shutdown ace2x1
# mount /dev/xendomu/ace2x1-disk /mnt
# mv /mnt/lib/modules/3.2.13/kernel/drivers/acpi/button.ko /mnt/lib/modules/3.2.13/kernel/drivers/acpi/button.ko.original
# cp ./drivers/acpi/button.ko /mnt/lib/modules/3.2.13/kernel/drivers/acpi/button.ko
# umount /mnt
# xen create /etc/xen/ace2x1
Connect to the domU
root@ace2x1:~# lsmod | grep -E "(button|fglrx)"
fglrx 3150992 3
button 12535 1 fglrx
root@ace2x1:~# dmesg | grep fglrx
[ 4.011571] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.047300] [fglrx] Maximum main memory to use for locked dma buffers: 1876 MBytes.
[ 4.047320] [fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 4.047331] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 5.966928] [fglrx] Maximum main memory to use for locked dma buffers: 1876 MBytes.
[ 5.966974] [fglrx] vendor: 1002 device: 6718 count: 1
[ 5.967189] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 5.967503] [fglrx] Kernel PAT support is enabled
[ 5.967527] [fglrx] module loaded - fglrx 8.95.3 [Mar 8 2012] with 1 minors
[ 11.422975] [fglrx] ACPI is disabled on this system
[ 11.877991] [fglrx] Firegl kernel thread PID: 921
[ 11.878106] [fglrx] Firegl kernel thread PID: 922
[ 11.878223] [fglrx] Firegl kernel thread PID: 923
[ 11.878359] [fglrx] IRQ 58 Enabled
root@ace2x1:~# aticonfig --initial
root@ace2x1:~# grep fglrx /etc/X11/xorg.conf
Driver "fglrx"
Finally, we have to ensure the xen-pcifront driver loads before fglrx, otherwise we'll get errors about fglrx being unable to find any display adapters. The ordering of the following is important.
root@ace2x1:~# vim /etc/modules
xen_pcifront
fglrx
Next > Windows Guest Installation
